Connect the Antenna to the Board

At the factory, there is an antenna in the packaging box for installation on the board. The antenna is needed for WiFi and Bluetooth functionality. The installation method is as follows:

Download the Corresponding Image

Use Network Disk 🚀 to download the .img image file from the System Image/Android14/ directory.

This document uses the image: android14_hdmi_dp_ap6256_msata_update.img

Look for image files containing ap6256 in the name, as this chip integrates both WiFi and Bluetooth functionality.

Flash the Image to the Development Board

Refer to Finished Image Flashing to flash the downloaded image file to the development board.

Connect to WiFi Network

Connect Bluetooth Devices