Download the Corresponding Image

Use Network Disk 🚀 to download the .img image file from the System Image/Android14/ directory.

This document uses the image: android14_hdmi_dp_ap6256_msata_update.img

This image integrates HDMI (up to 4K) and DP dual display output, AP6256 WiFi/BT functionality, and supports mSATA solid-state drive expansion.

Flash the Image to the Development Board

Refer to Finished Image Flashing to flash the downloaded image file to the development board.

Connect the DP Display

The board's DP interface is the same as the OTG Type-C interface.

ADB and DP functions can only be used one at a time.

You need to purchase a dedicated Type-C to DP cable to connect to the monitor, and the monitor must support the DP interface.

The cable used during testing is from UGREEN: DP1.4 Bidirectional [8K/60Hz-Alloy Braid] - 1.5 meters

This is just to inform you of the cable model used, no commercial recommendation is intended.

Located on the side of the development board:

After startup, the screen will look like this: