Connecting DP Display

The board's DP interface is the same as the OTG Type-C interface.

ADB and DP functions can only be used one at a time.

You need to purchase a dedicated Type-C to DP cable to connect to the monitor, and the monitor must support the DP interface.

The cable used during testing is from UGREEN: DP1.4 Bidirectional【8K/60Hz-Alloy Braid Style】-1.5m

This is just to inform you of the cable model used, no commercial recommendation is intended.

Located on the side of the development board:

Downloading the Corresponding Image

Download our provided .img image file from the Network Disk🚀 in the System Image/Debian12/ directory. The image used in this document is: TaishanPi-3M-RK3576_Debian12-Xfce_AP6256-mSATA.img

This image integrates HDMI (up to 4K) and DP dual display output, AP6256 WiFi/BT functionality, and supports mSATA SSD expansion.

Flashing the Image to the Development Board

Refer to Finished Image Flashing to flash the downloaded image file to the development board.

The first time you flash the image, it will automatically restart once. Please wait patiently.

Username and Password

Username: lckfb

Password: lckfb