Download the Corresponding Image

Use Network Disk 🚀 to download the .img image file from the System Image/Android14/ directory.

This document uses two images (select according to your display model):

[1]. android14_hdmi_dp_dsiC41409463_ap6256_msata_update.img

Compatible with the MIPI touch display model C41409463 from LCSC Mall.

[2]. android14_hdmi_dp_dsiC42388916_ap6256_msata_update.img

Compatible with the MIPI touch display model C42388916 from LCSC Mall.

These two images support HDMI (up to 4K), DP, and MIPI triple-screen display output, AP6256 WiFi/BT functionality, and mSATA solid-state drive expansion.

Note: Because the MIPI parameters limit the resolution, HDMI and DP resolutions will be constrained to the MIPI screen's resolution range. This means HDMI and DP displays will have black borders.

Flash the Image to the Development Board

Refer to Finished Image Flashing to flash the downloaded image file to the development board.

Connect the MIPI Screen and Touch Interface

The board's interfaces are located on the back:

After startup, the screen will look like this: