MIPI Camera

The MIPI camera model used this time is IMX415. Reference link: IMX415 Camera Module.

This is provided for reference only, with no affiliation to the merchant.

Download the Corresponding Image

Use Network Disk 🚀 to download the .img image file from the System Image/Android14/ directory.

This document uses the image: android14_hdmi_dp_ap6256_msata_update.img

Basically all images have all three camera interfaces enabled by default, so there is no need to specifically download a particular image.

Flash the Image to the Development Board

Refer to Finished Image Flashing to flash the downloaded image file to the development board.

Connect the Camera

Simply connect the camera module to the board's MIPI camera interface via the ribbon cable. Any of the three camera interfaces can be used, and the system can recognize them all. The Camera app is installed by default in the Android system and can be used directly.

After entering the system and opening the Camera app, you can see the camera has been recognized and is ready for use.

Note: If the camera still fails to open after multiple attempts, please power off and re-plug the camera module before trying again.