Connect DP Monitor

The board's DP interface is the same as the OTG Type-C interface.

ADB and DP functions can only be used one at a time.

You need to purchase a dedicated Type-C to DP cable to connect to the monitor, and the monitor must support the DP interface.

The cable used during testing is from UGREEN: DP1.4 Bidirectional [8K/60Hz-Alloy Braid]-1.5 meters

This is just to inform you of the cable model used, and no commercial recommendation is made.

Located on the side of the development board:

Download Corresponding Image

Use Network Disk🚀 to download our provided .img image file from the System Image/Buildroot/ directory.

The image used in this document is: TaishanPi-3M-RK3576_Buildroot_AP6256-mSATA.img

This image integrates HDMI (up to 4K) and DP dual display output, AP6256 WiFi/BT functionality, and supports mSATA SSD expansion.

Flash Image to Development Board

Reference Finished Image Flashing to flash the downloaded image file to the development board.